|
|
1987-93 Ashtray Door Fix
*Patented, June 2002* Click Here for Instructions.One of the most annoying interior problems with a late model Mustang is the center console ashtray door. The center consoles of 1987 to 1993 Mustangs have inherent design flaws that cause the door to stop functioning after a short time. Mavromont Industries has designed a permanent fix for this problem that does not necessitate the need for a new door, spring, or center console piece. You can use your existing parts. A new ashtray door by itself costs approximately $20.00 form Ford! In actuality the door or spring are rarely the problem. This is not a partial fix and does not use magnets or weights. Once installed, your ashtray will function like new, the door will stay open and stay closed! No unsightly weights, magnets, bolts or screws! Retain the stock look and function! This is a complete kit that fixes the spring, peg (stud), and metal plate! These weak areas are discussed below. 1. The first problem is a weak plastic tab on the underside of the console that holds the spring. The key to fixing the 1987-93 ashtray doors is the spring tab on the center console. This spring is held under constant tension and functions to hold the door open and closed. Now, the spring tab is what holds the spring in place and often fails (since the spring is metal and the tab is plastic). There are three ways that the spring tab fails. First, the spring will wear out the small hole at the end of the spring tab. Secondly, as the spring tension bends the tab out- ward, the spring passes through the enlarged hole and the door stops functioning. Lastly, sometimes the tab just breaks. Our kit provides a new SS metal spring tab. 2. The second common weak point is the peg near the cigarette lighter. Our kit also fixes this secondary problem with a replacement metal peg. 3. The last weak point is the 1991 to 1993 plastic doors. They have a metal plate/stop attached to the underside that usually becomes dislodged. Our ISB-01A kit has provisions for this type of problem and the plate can be discarded. We have spared no expense in manufacturing a quality product. All pieces included in the kit are stainless steel for both durability and longevity. With this kit, your ashtray door will function as it did when it was new and will not go bad again! No more frustrating non-functioning ashtray doors!!! Please note that there are two types of doors used on the 1987 to 1993 Mustangs. These are a one piece metal door and two piece plastic door. The metal door was used on all 1987-89 mustangs and on some 1990 and 1991 Mustangs. The plastic doors have a a contoured metal plate attached to their underside. The plastic doors are typical of, but not exclusive to, 1991-93 Mustangs. The metal doors do not use all the parts in the kit while the plastic doors do use all the parts. Please see our instructions for more information. For information on the differences between metal and plastic doors, click here
Customer Comments
James T. Vanwagner: 3/21/2001
I ordered the Ash-tray door fix + spring a few weeks ago and received my parts less than a week later. The day I received this kit, is the same day I spent the 15 minutes fixing it and have been very pleased with ever since. Despite the small scale of this fix in relation to all the other things wrong with my car, this has given me such satisfaction and I wanted to say Thanks for having such a well designed kit for such a paltry sum. Jeff Huff:
I now have an ashtray door that works on my 90 GT Mustang! This is the second Mustang that I have owned and like the first, the ashtray door was broken when I bought it. Thanks to your company's product, the problem is cured on my current Stang. I read about your product in 5.0, then visited your website. Online ordering was easy (Ordered on a Sunday, delivered by Thursday), and installation was a snap, about a half hour, with the easy to read instructions. Thanks for the "effective and economical" solution to a common problem. The ashtray door works good as new. Neil P Bauman:
My 1989 Mustang 5.0 is my baby, and it bothered me to no end that the ashtray door did not close... This was my Mustang, and that just was NOT acceptable. Fortunately, I saw your company in 5.0 Magazine "Tech Inspection" section with what appeared to be a "miracle cure" to an all too common (Mustang) problem. Honestly, I met it with some skeptisism. It just looked too easy, but for the price I couldn't go wrong and decided to order a kit. It only took me 45 minutes to do the whole job which included cleaning out the underside of the console. When I was finished I was pleasently surprised...IT WORKED, and it was easy! Thank you Mavromont for producing a quality product, shipping it quickly, and making it so easy! Paul Fineberg:
I've spent lots of cash on this car and I'll tell you that not all of it was a good investment. The 1987-93 ashtray door fix is big bang for the bucks. You have no idea how much that broken door bothered me. I tried every thing but gluing it shut. I found the kit was of good quality, clear instructions, and most importantly, IT WORKED! .... Keep up the good work. Laura Nelson:
I just finished fixing the ashtray door of my '93 Mustang GT and I am very grateful that I saw your advertisement in 5.0 Mustang. You did a wonderful job with this product...I'm very pleased. The service while ordering was excellent and also the shipping time was very prompt. Mark Ridenour:
I am pleased that your 1987-93 Ashtray Door Fix kit actually fixed my ashtray door! I was skeptical about it working; but for the price I could not lose. I am glad I took a chance and bought it. I have also told all my 5.0 buddies about it, I guess they'll be calling you to order and calling me to borrow my Dremel! Thanks for producing a genuine fix to a common Mustang problem!
|
Ashtray Door fix



